Artifical JewelleryBollywood Jewellery

Steps to clean artificial jewellery


Cleaning artificial jewellery is an important task to keep them looking their best. In this guide, we will discuss the step-by-step process to clean artificial jewellery in detail. Artificial jewellery is a great way to accessorize any outfit and make it stand out. But, with frequent use, artificial jewellery can become dull, dirty, and lose its shine. So, let’s get started on how to clean your artificial jewellery.

artificial jewellery

Step 1: Prepare the cleaning solution

The first step is to prepare the cleaning solution. You can make a cleaning solution at home by mixing some warm water and mild dish soap in a bowl. Avoid using hot water, as it can cause some stones to come loose or damage the glue holding them in place. Another option is to use a commercial artificial jewellery cleaner, but make sure to read the instructions carefully and use it only as directed.

Step 2: Soak the jewellery

Once you have the cleaning solution ready, it’s time to soak the jewellery. You can put the jewellery in the cleaning solution and let it soak for about 10 to 15 minutes. This will help loosen any dirt or grime that has accumulated on the jewellery.

Step 3: Scrub the jewellery

After soaking the jewellery, take a soft-bristled toothbrush and gently scrub the jewelry. Be careful not to scrub too hard, as it can cause scratches or damage to the jewelry. Pay special attention to any crevices or hard-to-reach areas, where dirt and grime can accumulate.

Step 4: Rinse the jewellery

After scrubbing the jewellery, rinse it thoroughly in warm water to remove any remaining soap or dirt. Make sure to rinse it well to ensure that no soap residue is left behind.

Step 5: Dry the jewellery

Once the artificial jewellery is rinsed, you can dry it with a soft cloth. Make sure to pat it dry gently and avoid rubbing it vigorously. Also, avoid using a paper towel or tissue, as it can leave behind fibers that can get stuck in the crevices of the jewellery.

Step 6: Polish the jewellery

If your jewellery is still looking dull or lackluster, you can use a polishing cloth to give it some shine. A polishing cloth is specially designed to clean and polish jewellery, and it’s available at most jewellery stores or online. Simply rub the jewelry with the polishing cloth, and you’ll see it start to shine.

Step 7: Store the jewellery

After cleaning and polishing your jewellery, it’s essential to store it properly. Artificial jewelry can easily get tangled or damaged if not stored correctly. You can store your jewelry in a jewellery box or a pouch to keep it safe and protected. You can also use a ziplock bag, but make sure to remove as much air as possible to prevent oxidation.

Additional tips:

  1. Do not use harsh chemicals or abrasive materials to clean your jewellery, as it can damage the jewellery.
  2. Do not soak your jewellery for too long, as it can cause some stones to come loose or damage the glue holding them in place.
  3. Always read the cleaning instructions that come with the jewellery before cleaning it.
  4. Do not wear your jewellery while swimming or taking a shower, as the chlorine in the water can damage the jewellery.
  5. Avoid spraying perfume or hairspray directly onto the jewellery, as it can cause discoloration or damage.
  6. Clean your jewelry regularly to keep it looking its best.
  7. If your jewellery is heavily tarnished, it’s best to take it to a professional jeweller for cleaning.


Cleaning artificial jewellery is an easy task that can be done at home with a few simple steps. By following the steps mentioned above, you can keep your jewellery looking its best and make it last longer.


Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button